2003 Pontiac Aztek "hub bearing problems cause abs" Questions

Ad

Question about Pontiac Aztek

1 Answer

...hub and bearing assembly. So once you find the bad you you will need to replace the entire hub and bearing assembly which will also come with a new abs sensor. I can give you more info on replacing ...

Ad

Question about Pontiac Aztek

2 Answers

...problems with my 2003 aztec. My AWD disable light stays on as does my anti lock break light. I have had the bearings checked a thorough brank inspection, brakes bled... there is absolutely nothing ...

Ad

...bearing/hub assembly sensor is part of it. only way to be sure is to scan the computer. if not your working in the dark. good luck You almost answered your own question. Get it scanned and repair ...

...bearing hoping it was related but not so. AWD Light is caused by your Rear Wheel Hub(s) one or both are going bad. Dealer cost is $500.00 part at Auto Zone is $129.00. Not to difficult to replace if ...

...Bearing-Hub-Assembly-Front/_/N-jnpe7Z8kns If I helped...please rate me...thanks! I agree my abs light came on a week before my bearing went out replaced bearing and hub which takes about an hour with ...

...hub bearing just follow ABS harness from hub bearing and unplug it replace bearing plug back in. there is no computer reset to do or any thing. Hello Matt. Without knowing someones mechanical ...

Question about Pontiac Aztek

2 Answers

...bearing where out and cause a code to set for that perticular hub. The reluctor in the hub wears onto the pickup causing this, do you have any abnormal noise while moving down the street? A slight ...

...hub [the sensor also gets damaged easily during winter from snow- ice -debris which is what usually pops an abs problem ---check the sensor -wiring and connector that is the usual problem The bearing ...

hub bearing,new hub.engine light you need a scaner to read code and reset. Ur abs is linked to the bearings the bearings have a magnetic strip only on one side of the bearings areoressed in "backwards

bearing,So it's easier to change bering and hub assembly before changing the hub check the abs connection-- the sensor wire connection clips onto the spindle-- a lot of times the connector comes loose

Not finding what you are looking for?
2003 Pontiac Aztek Logo

567 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...