2003 Pontiac Aztek "cause fuse wipers blow turn" Questions

Ad

Question about Pontiac Aztek

1 Answer

...wipers and wiper fluid. Is the Motor out? I read the manual and it said that the fuses are set to automatically stop before blowing out. Any help? this is no easy trouble shoot! GM put a few thing on ...

Ad

...FYI: Too small an amp on the fuse will blow when the wiper is turned on. Too large of a fuse will cause the wiring to burn if your wipers should stop shifting and jam. Good Luck. Hope this

Ad

Question about Pontiac Aztek

1 Answer

...fuse blows only when you turn the wipers on then more than likely the wiper motor has shorted and burned out. This one is very likely if the snow storm was heavy and you was driving in it. Cause- ...

Question about Pontiac Aztek

1 Answer

...cause blown fuses.  There are many people that do not understand this.If the fuse remains intact until you turn the switch on, you will find the problem between the wiper (combination) ...

Question about Pontiac Aztek

1 Answer

...fuse to blow ? if motor has a short wire to earth on exterior ? usually brown ? this is auto park cut or disconnect then ensure you have correct amp fuse and see if fuse blows? if yes then provided ...

Question about Cars & Trucks

1 Answer

...fuse to blow. Fix or replace the wiper motor. When diagnosing blown fuses, I usually temporarily replace any fuse in a vehicle with a circuit breaker type fuse. If there is still a short somewhere in ...

...fuse blows every time we turn on the wipers but when we unplug the intermediate wipers it does not blow. Any suggestions? I would advise you to check the wiring they could be causing some short ...

Question about Pontiac Aztek

2 Answers

...fuse blows again then check the wire loom for a bare wire Check the colour of the wires at the plug on the motor. The most likely place for the wires to short out are at the switch. It may be an ...

...cause fuses to blow. If the motor is found to be running hot, either strip it, clean all the parts and re-grease it, make sure that the shafts turn freely before reinstalling it. (Have a look if any ...

Question about Pontiac Aztek

1 Answer

...fuse is serious, and could cause many more problems, check for a good ground, clean all grounding wires in the system for that fuse, if you wrapped the wires and it quit for a brief time, one of them ...

Not finding what you are looking for?
2003 Pontiac Aztek Logo

567 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...