Question about Oldsmobile Silhouette
...sliding door). I heard a noise. I tried to open the power sliding door manually and it opened, but then I was back at square one. It didn't want to close. I then tried to hold the door closed and ...
...door panel off found 2 bolts anything else or just force loose? If you removed the 2 bolts near the handle (1 you reach by removing the lock & pwr windows control panel by prying it up, it will ...
Question about Oldsmobile Silhouette
...sliding door handle on oldsmobile silhouitte The process of removing car door panels is essentially the same for each make of car. You may need to remove these panels when your fixing locks or power ...
...sliding door mechanism by having a wire unplugged & I would like to enable it again, how do I do this. I checked on bulldogsecurity.com to get an idea of the placement of where this plug might be for ...
...door panel a) Remove the panel around the door handle (small panel) by pulling backwards slightly, then popping out. The door lock comes off by pulling out on it (with force). Then lift the panel up ...
Question about Oldsmobile Silhouette
...Sliding Door will not open I have a 2002 Olds Silhouette and the driver side power sliding door will not open with any of the three options to open it (remote, button on side, button on console). It ...
...door upon opening causes the interior lights to come on. The rear sliding doors switches appear to be in excellent shape with no corrosion. The front switches are probably inside the door panel and I ...
Question about Oldsmobile Silhouette
...telling me? It is likely the power sliding door. If you turn off the PSD feature and close the door manually you can by-pass the alarm. Most likely the automated closing mechanism is having a ...
376 questions posted
Usually answered in minutes!
601 Questions
450 Questions
394 Questions
322 Questions
211 Questions