1998 Oldsmobile Aurora "remove upper intake distributor" Questions

...upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb ...

...Remove upper intake manifold. REMOVING THE LOWER INTAKE MANIFOLD STEP 1 Remove the distributor and label the spark plug wires. STEP 2 Remove heater hoses and bypass hose. STEP 3 Remove upper radiator ...

...Remove upper radiator hose at thermostat housing. Disconnect accelerator and cruise control cables. Remove heater hoses from intake manifold. Remove EGR pipe. Disconnect fuel lines at rear of engine. ...

...Remove the distributor cap.3. Take out the three left bank injector connectors, the thermal transmitter, the ground harness, breather pipe and the upper manifold. Disconnect the fuel feed and return ...

...sweet after removing and not blowing any fuses Won't cause any issues as long as it is hooked up and it also is grounded well. Many fords put them on the upper intake, right at the front of the

...upper intake or not? And also, since im takin it off I was going to clean it out because its very dirty inside (and I had other issues I posted and I was told I should clean it) And I was wondering ...

...upper radiator hose and the bypass hose from the thermostat housing. To gain access to the thermostat housing, either mark the location of the distributor, loosen the hold-down clamp and rotate the ...

...upper intake gaskets. I removed distributer the engine light is on. I hooked up computer to read codes. The code is for distr. and crank not in sequence. You have to adjust the distributor to get get ...

...upper and lower intake gaskets, cleaned throttle body, ran multiple tanks of treated fuel, checked all vacuum hoses and connections, removed one plug wire at a time (no change). Camshaft position ...

...remove the mounting bolts. There are upper and lower mounting bolts. Separate the ignition coil from the mounting bracket. Install the New Ignition Coil Step1 Insert the new ignition coil. Mount the ...