2006 Nissan Titan "blower high" Questions

If it is only working on high,then this is the problem.If it works on high when you select a lower speed,then there is a high blower motor relay that is stuck in the closed position .Replace the relay

...blower fan switch only has a high. As soon as I turn it on it goes to high. Would this also be the relay? this sounds like a bad blower motor resistor board that has gone bad. they are designed to ...

...only blew on high. Today when I started the truck it won't blow at all. Any suggestions? Hi, each fan or blower have switch to work on high and low blowing air. Check your blower switch

Blower motor resistor needs to be replaced. It stayed on high for a while then finally quit. Where is located and how to install? behind the glovebox next to the blower motor. remove connector, remove

...blower switch The fan switch only goes to high when I turn it on. Can this be the relay or something else? Fan speed is controlled by a rheostat near the blower motor there will be a connection with ...

...high only what solutions Some fixya user told me a website reliable-store it is very good.. I used it to repair my shredder it had some spark issue which wasn't easily fixed. you can go there and try ...

...instead of a varriable setting switch. Anything other than the off position the fan is on high. Thanks for any help it is the resistor pack that runs the blower motor it is shorted to the hi ...

heater stuck on high heater stays on high at all times You may have a bad blower motor resister.

...blower for the a/c will quit and start up on its own. Sometimes when you have it on high, you can't adjust it down. If you turn it off, it will not turn back on. Sounds like the blower motor is ...

...knob for heater/ac works on high only. This problem is caused by the blower speed control resistor being defective for the blower motor. The resistor is located near the blower motor under the