Mitsubishi Pajero 2.8 Auto Diesel Fieldmaster. The reversing lights and reversing alarm no longer work. I have checked the fuses and all seem to work. If there is a reversing switch connected to the ...
For some strange reason my reverse lights have decided to stay on permantly and my sppedo has stopped working. I have took out all the relays one by one and they still stay on. I have even ...
reverse gear when i engage reverse in my auto pajero the front wheels lock and when i try and move the car it punctures the front left hand tyre Sounds like a broken tie rod. Tow truck time.
when using the reverse ,it kicks,jerks when stepping on the pedal. Make sure about these things, tranny fluid, motor mounts are correct and also check the torque converter clutch, a bad shift solenoid
Question about Mitsubishi Montero
AUTOMATIC TRANSMISSION , REVERSE GEAR WORKS , DRIVE DOES NOT My 2.5 LWB does not move when lever is at D, D2 & L , when the gear lever is at R it reverses normally . what could be the problem? check ...
...controlled fuse. The mirrors will not have a specific fuse for their function , the same way the reverse lights don't have a fuse. (general unspecified IGN circuits). You best bet is testing all ...
Shopping in the Mall the trasmission dont change. I select drive, reverse , L1 but nothing pass. Well i call the towing service. Its possible the problem is a relay or damage cable? The model is ...
...clutch and using the transfer lever select either low or high range. some vehicles need to go in reverse first before the transfer gears engage; that is usually hiluxes.Don't forget to do this ...
Broken crankshaft pulley bolt on 99 Ford T-bird How do i remove the broken bolt You will need a very hard drill bit, preferrably reverse thread, and drill it out, and use an easy out to remove.
4x4 wont turn off the tranmision is stuck on 4 high try going in reverse once transfer is in neutral
44 questions posted
Usually answered in minutes!
410 Questions
235 Questions
259 Questions
119 Questions
98 Questions