FIRING ORDER Fig. 3.0L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system Fig. 2.4L Engine Firing order: ...
Ignition problem.....my ignition key turns hard and won't fire till its jiggled a little. Replace the ignition switch,it has a short in it.
Question about Mitsubishi Montero
how do i set the ignition timing for my 99 mitsubishi montero sport 3.5 removed timing belt and need reset ignition timing. You need a "timing light" to set your timing. Timing belt is mechanical ...
Question about Mitsubishi Montero
engine #4G94 Mitsubishi Pajero IO coil running hot when ignition is on coils are normally hot when the engine is running but if it is over hot ( burn to touch) then it may be a 74.5 volt resisted coil
Question about Mitsubishi Montero
The problem with my car pajero Io is that everytime I put the key in the ignition it starts hooting through out, it was discovered that liguid in the swicth is finished after removing aire bag How ...
no start no spark on 1990 mitsubishi montero changed ignition coil,still no start.changed ignition module and it started about 5 times then it shut down and it wont start with no spark. replace cables
where the ignition relay for 1998 Mitsubishi Montero where the ignition relay would be located for a 1998 Mitsubishi Montero open the hood of he car and all the main relays are in either right or left
no spark to spark plugs if you have a distributor ignition,then the rotor button is bad. if its a distributorless ignition,then the coil packs are bad.
my pajero io ignition coil always burnt. why? I thank ecu oscilation signal error and ignitation timming error
key stuck in ignition had a new key made - put it in ignition, will not come out - car will not start it's a 2006 mitsubishi eclipse I know you don't want to hear this but you will have to have the ...
627 questions posted
Usually answered in minutes!
235 Questions
259 Questions
119 Questions
98 Questions
89 Questions