2001 Mitsubishi Galant "galante 3 belt" Questions

Ad

...belt off. 2. I use a wire brush to get melted rubber out of the grooves on pulleys with grooves. I use a wire brush then sand paper to remove melted rubber of smooth pulleys. 3. You should always ...

Ad

Question about Mitsubishi Galant

1 Answer

...attacked to the side of engine then you have 3 open belts. The timing belt is connected to crank at engine to camshaft for cylinders. if incased it is a timing belt. it will be a challenge to put

Ad

3-4 MPH AND POP. I RELACED THE BELT BUT LOOKIN FOR THE DIAGRAM I SEE THAT THERE IS TWO BELTS A CRANK BALANCER BELT??? IF IM CORRECT. I ALSO REPLACED THE CRANK POSITION SENSOR IM JUST NOT TOO SURE WERE

i need to replace the belts in the car but i need a diagram If the belts are there, make your own diagram. How many belts are there? 2 or 3 If it has 2 or 3 belts they only go one way.

...belt on a 2001 mitsubishi galant.. or maybe where to find a good manual This will take about 3-4 hours. If you look at the drive belts, they will all have to be taken off to get to the timing belt. ...

2003 Galant stopped while driving. Both belts okay. Oil is okay. Can not get engine to start. Battery is okay. While not turn over at all. sounds like a bad ground wire,also chech theelectrical plug ...

Question about Mitsubishi Galant

1 Answer

Hey

...to push on, and everything like the stereo, and lights all come on, but it won start, Gas pump, timing belt, coil Distributor pickup coil, a number of things, look for the 3 elements, gas spark and ...

2000 Mitsubishi Galant 4 cyl ES underhood squeal on right side I have a 2000 Mitsubishi Galant 4 cylinder es. I hear a loud squeal when I start the car that lasts for a short while and then stops. The

Question about Mitsubishi Galant

2 Answers

...belt and 2-3 hours of shop time at whatever shop rate is in your location. Is your car still running? if it is, you definately want to have this done, if the belt breaks, valves in the cylinder head ...

Question about Mitsubishi Galant

1 Answer

...belt goes on before taking off. 3. Take the 2-3 bolts off that hold the alternator in place. 4. Take wire connector plug off of alternator. And you should have an alternator out of your car. Good ...

Not finding what you are looking for?
2001 Mitsubishi Galant Logo

1,076 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...