Question about Mitsubishi Montero Sport
...and tries to drive of its own accord. hope its now the transmission gone bad, but try these check, is there trans fluid in the trany/ check the fuse ad relay pertaining to the trany. change the ...
transmission problems 99 ford windstar 3.8.transmission o.d. light keeps flashing getting codes 743,750,755,760 trani was bad already replaced that w/used trani still trani dosent shift and keeps ...
Question about Mitsubishi Montero Sport
trany shifter on the floor for 4low neutral 2hi ,and 4hi What fuse's ? What all do the fuse's power ? Would need to look at a power distribution diagram ! Need fuse number ! Explain , 4X4 blowing fuse
Question about Mitsubishi Montero Sport
...trany. I drove it home, 3 miles, and it ran execellent. Later that day we drove it 1.4 miles and it went into safe mode again. The TCU/SRS DIAG fuse (10 amp) keeps burning out. Everyone is extremely ...
...trany control module) is not responeding, this be be due to a bad module or broken wire or blown fuse. start by checking the fuses all of them, then check the connection on the module, this module is ...
...fuse or a switch issue. Check the switch next. depend on what engine you have and if it's a standard or manual transmission. first check our fuses and relay. if you have standard transmission, the ...
...with the old one? Are thay saying the trany broke the computer? A. Fuse B. Something was not pluged back in. C. A wires was damaged when trany was instaled. D. Corrision in plugs** E. Bad ...
No reverse lights, bulbs are good. 1996 F250 5speed If there is no power at socket, check for a blown fuse, if fuse is good still check it for power, you can check the b/u switch on the trani, I think
...trany will not shift into 3rd or 4th/overdrive and I'v heard it can be the TCM fuse and I was wondering wear is the TCM and wear could the fuse be The TCU is located under the glovebox and I think ...
fuse was blown. When replaced the vehicle worked just fine. It is an onboard computer problem. 2 ways to fix...1. long way..turn the ignition on and count the number of flashes. That will be the error
663 questions posted
Usually answered in minutes!
593 Questions
263 Questions
124 Questions
6 Questions
380 Questions