1999 Mitsubishi Montero Sport "neutral wire definition" Questions

...wire connector at the neutral safety switch, then remove the securing screws and then remove the neutral safety switch. Install the new neutral safety switch and do not over-tighten the securing ...

...drives fine in 2wd, but 4 will not engage. Transfer case shifts smoothly between 2/4/4lo, and in neutral it really is in neutral. I get no light on the dash, however, and it's definitely not ...

...and out of gear and back to Park then try it. Have you tried starting the truck with the shifter in Neutral? If it turns over and starts, I would check the Neutral Safety Start Switch and it's ...

neutral safety switch as a problem...If you do read 12 volts on that wire then the starter solenoid is defective...Make sure you have a solid ground to the chassis...Guru...Saailer Before investing in

...still says "D" shift it into Reverse, shifts and indicator shifts to "R" but then put it in Neutral or Park and indicator stays on "R" when it does this, it shifts harder then normal. During ...

...I should have checked and filled the torque converter.... HELP !!! With the engine running in neutral with e-brake on, pull the transmission dipstick and check the fluid level. It definitely ...

...no than you need a starter solenoid,if yes than you need to check wiring,ignition switch or the neutral safety switch.Let me know if you need further assistance. It sounds like you need a starter ...

...ground cable. look at fuse and fuse link.a bad ignition switch.and transmission selector switch or neutral

saab 95 wont start after beening turned off This is almost always the PRNDL neutral safety switch on the transmission. Internally they have metal traces on plastic backing and after several years the ...

...wire , now when i start it it keep trying to turn over , JUst help Lately i ahve been haveing to jump the car with a with touching some part of the starter ( and it starts) Can't get it to start by ...