...idle speed and other engine factors. The solution given to me was to recheck the battery connections (make sure they are clean, and tighten down), start the vehicle, and just let it sit and idle for ...
...engine test terminals. After completing adjustment, remove jumper wire. Curb idle speed (750 RPM) transmission in drive. 3-13 Degrees Application: With automatic transmission Note : Before top dead ...
...for the particular operating conditions. --- ADJUST IDLE SPEED IT SHOULD BE 850 RPM FOR MANUAL AND AUTOMATIC 850 RPM FOR THE 3.0 ENGINE 700 RPM. What should the ISC motor be set at for a 92
adjust the idle , There is a minimum idle adjustment set at the factory , you don't want to mess with that . The PCM / ECM ,engine computer controls the idle speed by the idle air control valve (motor
Question about Mitsubishi Montero Sport
adjust the idle air right at the air intake From about 1992 models, subject to geographic variations, the idle speed is preset by the engine management system and is not adjustable, though it might be
Question about Cars & Trucks
...adjust the engine idle RPM speed by opening and closing an air bypass passage inside the throttle body. The cars computer or ECM (electronic control module) receives information from various sensors ...
...engine idling at too low of a speed or do you wish to adjust the idle so it idles at a lower speed because it's running too fast? If it's the latter, the engine control computer has complete control ...
Question about Mitsubishi Montero Sport
...engine idles high, how can I adjust the idle speed. Its not really adjustable. The computer controls idle speed via the idle air control valve. You probably have a vac leak. You could override the ...
engine ticking at idle and low speeds does not make any noise as I drive faster, but very worried.... maybe loose lifter ,just got oil changed because oil light was turning on during stops. Hi There, ...
idle speed by tightening the throttle cable at the throttle body located on the top of the engine at the intake manifold. It's ran fine since, about 3 years now and the problem has not repeated itself
434 questions posted
Usually answered in minutes!
594 Questions
427 Questions
124 Questions
6 Questions
380 Questions