...surface/replace if req'd 4. install new pilot bearing clutch disc using special alignment tool and torque all bolts to factory spec and procedure , some recomend new bolts 5.reassemble in reverse ...
Question about Cars & Trucks
pressure plate bolts: Tighten to 22 Nm (16 lb-ft) It is important to use a torque wrench to ensure that the bolts are tightened to the correct specification, as over-tightening or under-tightening can
Question about Cars & Trucks
...torque pounds for flywheel nut and fan blade bolt for a tb320bv 1.Flywheel - 61 to 69 Foot Pounds 2.Pressure Plate - 25 to 33 Foot Pounds 3.Bell Housing - No specs found. I would say 25 to 35 foot ...
Question about Mitsubishi Eclipse
Pressure plate to flywheel bolts12-24 ft/lbs Rocker arm fulcrm bolts18-25 ft/lbs Spark plugs7-14 ft/lbs Timing chain cover bolts12-18 ft/lbs Vibration damper to crackshaft bolt110-130 ft/lbs Wheel lug
...Torque bolts to spec. reconnect the trans to the motor. Few other things to think about. You should replace the throwout bearng when doing a clutch. Lube the clutch fork as directed without getting ...
Torque to: 7/16 Main Caps (2 bolt) Engine Oil 70 ft-lbs. 7/16 Inner Main Caps (4 bolt) Engine Oil 70 ft-lbs. 7/16 Outer Main Caps (4 bolt) Engine Oil 65 ft-lbs. 3/8 Outer Main Caps (4 bolt) Engine Oil
torque specs for the pressure plate just replacing the clutch 15-25lbs there should be 6 bolts apply lock tite to bolts and then tighten them all down till they are seated. Pick a bolt(call that bolt
...the torque specs are for the clutch bolts, can you help Clutch disc and pressure plate. The bolts should be tightened in 2 or 3 steps, gradually and evenly. Final bolt torque is 14 ft. lbs. (19
...torque specs for flywheel, pressure plate, bell housing bolts for 97 Nissan maxima 1.Flywheel - 61 to 69 Foot Pounds 2.Pressure Plate - 25 to 33 Foot Pounds 3.Bell Housing - No specs found. I would ...
Torque specs for a. Flywheel and pressure plate on a94 geo tracket tracker you meant, im sure. this is a suzuki G16 engine, and has 2 flavors, 8valve and 16v and has 2 clutches, for each. (to handle ...
509 questions posted
Usually answered in minutes!
696 Questions
644 Questions
344 Questions
319 Questions
306 Questions