Loud squeaking/ squealing noise when turning wheel My GTO is making a loud embarrassing squeaking noise when I turn the wheel. I have replaced the shocks,cambers, lower ball joints, rack boot, tie rod
...ideas anyone Depending on the year of your gto it could be a buggered CV joint on one of your back wheels. All GTO/3000GT are four wheel drive but up to the mid to late 90's they had four wheel ...
...battery and wait 5 minutes... 2) Use a 10mm socket to remove 4 airbag bolts on back of steering wheel assembly, remove airbag. 3) Remove steering wheel nut and pull out steering wheel (need
1991 300GT Electrical Motor Noise in rear wheel wells A sound like an electrical motor noise can be heard in the rear wheel wells even when the engine is not running, but the key is at the ACC ...
...gearchange control cables and hang up to one side. Jack car up as high as you can and remove the wheels. DRAIN the gearbox (24mm not on bottom side). Now go under the car and remove the starter ...
how do i replace rear wheel bearings Remove tire, brake caliper, rotor, and abs sensor. Remove complete steering knuckle with hub, rotor sensor, splash shield, and bearing with seals from tie rod, ...
...93 mitz...3000 GT sl. I have no turbo. I do have manual tranny and standard air condition, and two wheel drive. How do I adjust the tension? Thanks for any help you can give me. Take the drivers ...
...Thanks Rashedy it is usually under the driver's side dashboard, up under the steering
...covers. The previous owner broke the key off onside and used a hammer to smash out the lock so the wheel can be turned. Thank you. they all come out pretty much the same and there are many videos on ...
wheel off set? How can I find out what the original wheel off set was/is for 97 Mitsubishi 300gt? 42 to 46 mm
113 questions posted
Usually answered in minutes!
128 Questions
112 Questions
121 Questions
100 Questions
96 Questions