...clutch pedal all the way to the floor and stock..i change the master cylinder ang bleed it still doing same problem what could be any other causing it any help will apreciate thank u...God bless are ...
...clutch has no give can't change gears nothing tried to bleed but it won't build up pressure ? What eles can I try Had a 92 Ford 3/4 ton 4x4. And the same problem. I changed the clutch master ...
...change Put in new clutch plate, slave cylinder, master cylinder, clutch fluid, did all the bleeding, changed gear box oil. Gears still stiff. Hard to get first and reverse gears and stiff for other ...
clutch hydraulics to get enough pressure to commence the regular bleeding process. hope this helps. i have changed slave cylinder master an still no presure on a 93 c1500 4.3 Just keep pumping it will
Question about Hyundai Cars & Trucks
...change the clutch, clutch master cylinder and the slave cylinder and I bleed them and won't go to any gears but when is off it does help please did you replace the pilot bearing do you have a good ...
change my slave and master cylinder in my 93 ford probe, the cluch wont come off the floor. Have you tried bleeding the master cylinder first? There should be a bleeder valve down on your tranny close
...change the clutch fluid and cant figure it out. any help on how to find a solution. i dont have the owners manual anymore, bytheway Take a turkey baster or similar item and **** the fluid out of the ...
Question about Cars & Trucks
if try use 5th and nothing when try to use reverse. I changed clutch master and slave cylinders but no change. Tranny has 320K miles, Engine has 350k miles, Truck has 465k miles Trans internal failure
...and moving parts. Sometimes these things can be a bear to bleed out, pump the clutch pedal slow, pausing 2 to 3 seconds between pumps to allow fluid to get from the resivoir to the master
...clutch cylinder master line popped apart (at the disconnect) on my 4th attempt to bleed. I was able to get it back together and gave up for the night. (Question #2) While trying to start the Jeep all ...
493 questions posted
Usually answered in minutes!
696 Questions
644 Questions
360 Questions
319 Questions
306 Questions
