1996 Mitsubishi Eclipse "cam position sensor located 4" Questions

...cam sensor and it is working properly it is upside down from the 95 but the ASD relay is operating so I assume it is intalled correctly for the 95 PCM. The crank sensor is also working properly the ...

...position sensor. no fire comes from crank sensor and cam sensors but their are 2 sometimes 3 sensors hooked on the firewall right above the battery change those they also will keep one from

...Some say yes, some say no, and some say it's the same as the hall effect/cam sensor?! This may help: ...

...cam position sensor located on a 99 oldsmobile alero, how easy is it to install? camshaft position sensor location on the V6 engine located at the front of the engine block below the power steering ...

...Cam Position Sensor. The Cam Position Sensor, Is common that the Cam fail on this Vehicle and similars of this. Tha Cam position sensor Is located: At end of the engine head, driver side. Is attached ...

position sensors in 2 banks, I’d like to know all these locations as I have p0014 and p0021 corresponding to both banks of CAM shaft sensors. Where are these locations please? I have 2009 Enclave also

...4 position sensors, between crank sensor, crank angle sensor, cam position sensor, and sensor sensing sensor, oh and cam angle sensor. Oh wait, maybe it's a bad ground. Nope, gotta be the

...cam position sensor on a 94 Toyota previa? up to 1994 Previa's the cam sensors are located in the distributor, there is one for each cam. labeled G1 & G2 which are the center 2 of the 4 wires to ...

...cam position sensor in the rear of the motor it has three wires I do not know how to wire it up cannot find no old wires just a melted cam sensor need help how to wire it back up to the PCM please ...

...Cam Position Sensor Location 3.6 engine (1) Camshaft Position (CMP) Actuator Solenoid - Intake Bank 1 (2) Camshaft Position (CMP) Sensor - Intake Bank 1 (3) Camshaft Position (CMP) Sensor - Intake ...