...l200 warrior changing up from 1st gear to 2nd allways snags but does not crunch I have just got a mitsibushi L200 with no hand book . Is there anyone who knows how to get it into two wheel drive, I ...
what are the tappet settings/clearance for a 2003 Mitsubishi L200 Warrior? twenty five
boost sensor code on my l200 warrior, with now smoke and low rev/power Check for loose boost hoses or even possibly a bad turbo. The ECU also controls boost so could be a factor in boost as well.
...my L200 warrior pick up , the side lights come on instead of the fog lights . what causes this ? a short can be causing it wires can be touchin making ur sides lights come on instead of the fog ...
...L200 warrior the front seat passanger seat belt alarm keeps going when seat belt connected there is a switch faulty if its not on the belt buckle it will be in the seat or under it search there could ...
l200 warrior No 1 piston at TDC on the firing stroke. crankshaft pulley notch in line with TDC mark on timing covet cam shaft pully notch in line with mark on head If it has dizzy then No1 at tdc will
...L200 Warrior 2007 but, I have test drove it today and the clutch feels really high. Is this a problem? Does it point in the direction of a new clutch? The salesman told me it could be adjusted but I ...
...L200 Warrior diesel 2477cc, the engine management light comes on, if you switch the ignition off let it reset then start it again it goes off untill you drive again, there isnt any smoke or unusual ...
how do i remove the immoblizer on my sigma ac110 in my l200 warrior you cant do you have the key that is not working if you do wrap a pieace of bare wire around the key and ignition that will start it
189 questions posted
Usually answered in minutes!
14 Questions
17 Questions
15 Questions
8 Questions
