Question about Mitsubishi Pickup
...change the bulb? Its a Mitsubishi L200 wondering how to change bulb's Remove the screws that attach the lense to the truck. Twist the bulb hold from the backside and remove the bulb. Installation is ...
...change a brake light bulb in a 1997 Nissan pickup truck? There are no apparent screws or anything to take the rear light assembly off the truck or to get into the assembly to replace the bulbs. ...
Question about Mitsubishi Pickup
bulb to change it I have removed the 2 screws that appear to retain it , but it still cannot be removed . try access from behind the fitting The housing that you removed the screws from is attached to
Question about Mitsubishi Pickup
...change the rear turning signal... does the one piece just pop off? thanks...richie No you unscrew the four screws on the outside and then remove the lamp assembly then twist the bulb holder counter ...
change headlight This is the same for the pick up as is the Trooper: Aerodynamic Type Replacing a headlamp bulb?1994 Trooper shown Replacing a headlamp bulb?1994 Trooper shown Disconnect the negative
1987 Nissan Pick-up, how do you access the tail lights. To change the bulbs. The tail light lenses are held on by several screws. Remove these, take off the lens and you can change the bulbs.
...to change the bulbs. examine the electrical connections of the bulb closely and replace with the exact same bulb. there are two sockets in there which look the same but take entirely different
...change a rear turn signal bulb on 97 nissan pick up .. how do you get there to do it i see no where to just pop off plastic cover or screw it off ? There should be a cover inside the box of the truck ...
...bulb to change the front turn bulb if there are 2 screws you can unscrew them or if its fixed you will have to remove the front Grill including the plastic cover around the head lights to get to the ...
...2 on the inside edge of the lense assembly,the 2 on the inside edge you have to open the tailgate to see the inner screws.remove the assembly then you can get to the bulb sockets to change the
189 questions posted
Usually answered in minutes!
14 Questions
17 Questions
15 Questions
8 Questions