1997 Mitsubishi Montero "brake rotors" Questions

...brake rotors I have owned this 1997 mitsubishi montero for 11 years and the front brake rotors have always warped after awhile. No other car I've owned has had this problem. I suspect that the brakes ...

rotors. Most brake pads have small steel tabs that touch the rotor at a 90 degree angle when it is time for replacement. if you keep driving on the worn pads, it will stop chirping but that just means

...brake pedal If you haven't already, feel your disc rotors and see if they feel rough where the pad makes contact. Your rotors may be worn beyond factory specifications, your pads may be worn and need ...

...rotors are bad.They are bent and every time the brake pads hit the bent spot the brakes jump Inspect the rotors if they show signs of bad wear and rough surface, change them. you can find good used ...

brake pedal travel is still very slow to "reset". I am certain my front's need new rotors, pads and possibly calipers due to the pistons being out too far? Just curious if someone has any idea. Also..

I get a very high pitched squeal only when I turn gently. I never had the problem on my 2000 Montero Sport until I had my brakes redone. I've taken it back twice but the mechanic can't find anything ...

...on the brakes is usually caused by warped brake rotors. If the warp is slight, they can often be turned or milled to make them flat again. If the warpage is excessive, they would need to be

Mitsubishi Montereo - Rear Brake pads I am changing the rear brakes and once I put the pads in the caliper won't go on the disk. you must spread the pads out....do this with a wedge-shaped tool and ...

...hot it sound like a cv joit maybe dont know o it only makes noise when i turn It also could be the brake rotor rubbing on the caliper pads as you turn, check the brakes before changing the cvu joint ...

...Brake Dstribution) so far...get to know this technology and be comfortable behind the wheels...visit www.abdbrakes.com/about.html  or call 00919544477754 The rotors and pads have to bed in, ...