1997 Mercedes-Benz C-Class "replacing output shaft seal" Questions

Ad

Question about Mercedes-Benz C-Class

1 Answer

...output shaft to precess which will open up a small gap with with the seal allowing fluid to exit. When the seals were changed what did the transmission oil look like?. Was it opaque and murky - it ...

Ad

Question about Mercedes-Benz C-Class

2 Answers

output shaft seal on transfer case is leaking hummer h2 How to remove axle shaft seal on hummer H2 If your output shaft is leaking lubricant you need to check to see if (1) Transfer case is overfilled

Ad

...output shaft seal or can it be done by removing the shaft and putting a new seal in? Year/make/model?? Most output shaft seals can be replaced with the transmission in the vehicle, Remove the ...

...shaft (output shaft) (19). Important: Do not damage the case. Attach a slide hammer with adapter to the axle shaft (output shaft) and pull the axle shaft from the case. Remove the deflector (28). ...

Question about Mercedes-Benz C-Class

1 Answer

...replacing seal? Just replaced the Tcase in my 89 waggy. Its the NP229 tcase. replaced the rear output shaft seal and it is still leaking. WTF what could be wrong. Not properly seated? Worn shaft? If ...

Question about Mercedes-Benz C-Class

1 Answer

...tools to do so? The output shaft seal does not need to be replaced from the inside. You take a screwdriver put it on the lip of the output shaft seal and pound it out towards the back of the

...replace? NOT THAT HARD IF YOU HAVE SLIDE HAMMER AND A 3 JAW ADAPTER.TO REMOVE REAR OUTPUT DRIVE SHAFT SEAL AND AND NEED A SEAL DRIVER TO DRIVE NEW SEAL IN THE TRANSFER CASE REAR.OUTPUT SHAFT

...output shaft seal or can it be done by removing the shaft and putting a new seal in? You should be able to change the shaft seal just by removing the half shaft. Parts By National Seal Bearing Hub ...

Question about Mercedes-Benz C-Class

1 Answer

rear output shaft seal? Yes just remove shaft and old seal and replace new seal with a piece of wood while tapping the wood all around the seal enenlt so you don't damage the new seal. Hope this helps

Question about Mercedes-Benz C-Class

1 Answer

...was told that I might replace the output shaft seal.. What could possible happened? YOU WAS TOLD RIGHT U NEED TO REPLACE THE OUTPUT SHAFT SEAL WHERE THE AXILE SPLINE GOES INTO THE TRANSMISSION.EASY ...

Not finding what you are looking for?
1997 Mercedes-Benz C-Class Logo

404 questions posted

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...