...recommend transmission replacement or overhaul. 3. If the fluid looks to be in good condition, suggest replacement of the Torque Converter Clutch (TCC) solenoid, and flush and refill of the fluid. 4. ...
...torque settings for some of the more common fasteners on the Peugeot 306: Wheel nuts: 80-90 Nm Engine oil drain plug: 25-30 Nm Engine oil filter housing: 25-30 Nm Engine oil cooler hose banjo bolts: ...
Question about Mazda Tribute
...the average person can, according to NASA, apply about 15 pound feet with a bare hand. Lots more here https://www.google.com/search?q=Citroen+C4+Grand+Picasso%2C+brake+caliper+bolt+torque+settings
Question about Ford Cars & Trucks
Torque settings for Ford Figo 1.5l Dragon engine 1.5l Dragon engine, 1.5l Ti VCT Engine Exactly which bolts do you need the torque settings for? Not all nuts and bolts are the same torque setting on a
...recommend consulting the manufacturer's service manual or a reputable mechanic for the correct head bolt torque specifications for your specific vehicle. It is important to use the correct torque ...
...torque settings for your engine. In general, the head bolts on an Isuzu 4ZE1 engine should be tightened in a specific sequence and to a specific torque specification. The block bolts should also be ...
what is the recommended torque setting for a 1997 camry transmission pan bolt? toyota recommends 43 in-lbs but you should torque between 80-120 in-lbs to prevent leakage
Question about Mazda Cars & Trucks
...torque settings? I'm sorry, but I'm not able to find the specific torque settings for the crankshaft main and big end bolts for the E2200 R2 engine without more information, such as the year of the ...
Question about Hyundai Cars & Trucks
torque settings for hyundai getz 1.4 16 valve g4ee engine I need the cam caps and thermostat hosing bolts torque settings for hyundai getz 1.4 16 valve g4ee engine The torque settings for the cam caps
...torque settings The torque settings for the cylinder head bolts on a 2005 Audi A4 1.8T engine are as follows: Step 1: Tighten the bolts in the sequence shown to 30 Nm (22 ft-lbs) Step 2: Tighten the ...
992 questions posted
Usually answered in minutes!
609 Questions
319 Questions
327 Questions
287 Questions
156 Questions