2002 Mazda Tribute "changing spark plugs 4 cyl" Questions

...spark plugs on 4 cyl engine. Started it up and it knocked pretty bad. Did have oil in the plug wells but cleaned out best I could. Turned engine off and restarted, same knock. Checked #3 plug to make ...

...spark on all 4 cyl's. Have changed plugs, wires, & coils. Swapped dead cyl #1 injector with good running cyl #2 cyl #1 still dead Replaced cam sensor performed noid test all injectors noiding. ...

plugs and wires now it has no power and is back firing it is a 99 mercury mystique i am looking for firing order the 4 cyl model is 1 3 4 2 - cyl 1 is on the left when looking at engine from the front

...spark plugs 2001 4 cyl hyundai sonata How do you change the spark plugs in a 4 cyl 2001 sonata. I have the plugs and wires, just dont know how to do it. thanks You change One spark plug, and One wire ...

...spark plug #4. Clear the codes and start and run the engine until the check engine light goes on. Check for codes and see if the code change for a different code. If it change the position observe ...

Spark Plug Gap for a 2.0 4 cyl.? I'm in process of changing the platinum bosch plugs for my '99 Escort's 2.0 4 cyl. Anybody know what the correct gap is for these plugs? 0.54 is the gap for the plugs ...

...help You may have a coil failure or spark plug failure on #3. Swap coil and plug of cyl#2 with cyl#3 and see if problem moves to cyl#2. If so, it will be a plug or coil. I wouls recommend changing ...

...spark plugs and wires and yet no change. Also the rpm keeps fluctuating sounds like the power pack is now good, follow the wire on the cyl. if its a 4 cyl. you might have to change the whole unit but ...

...spark plugs and noticed that the 1995 Honda Accord 4 dr 4 cyl i was checking my spark plugs and noticed that the spark plug boot was covered with oil ! what do i do to fix this ? Change valve cover ...

...good spark on all cyls. I can pull the wire on #4 and there is no change as far as the ruffness goes. I've changed plugs. #4 is dead. maybe injector is not firing also check compression on that ...