2002 Mazda Miata "bonnet lever working" Questions

bonnet. The car manual refers to operating the door mirror defroster by switching on the rear window defroster. Can you advise if these extra two wires are for the heater elements on the door mirrors,

...lever in the grill for the bonnet has been pushed in and has dissappeared. How can this be fixed? when you say the bonnet has been pushed in do you mean like in a traffic accident if this is the case ...

bonnet lever under dash not working cant open bonnet car is 2000 reg e46 bmw 318i My bonnet lever has snapped and i need to replace my battery to start my car... any idea how i can get into the engine

...lever, therefore making in near impossible to open bonnet (hood), so you may need someone to push or pull up on it as you pull the lever. See if you can get at the cable itself, directly behind the ...

...bonnet of my Rav4. The lever pulls back ok, but the bonnet doesn't open. Thanks Try having someone hold the lever to open it, then you go to the front and try prying the hood (bonnet?) up with your ...

...lever has to move towards driver's side to open. Had same problem - pulling the release felt normal but bonnet didr not pop up an inch as usual. Got a friend to lift the bonnet whilst I held the ...

...bonnet. He pulled the lever from inside and told me to press down on the bonnet at the same time then open the bonnet as normal with the outside catch. It worked ok. After doing it oil the catch ...

...lever from inside and it releases bonnet just a couple inch, then when try to lift bonnet up it wont open. regards mike, and thanks in advance There is another lever at the front of the car that you ...

...lever to 'pop' the bonnet but some car manufacturers fit a metal plate behind the grille to stop you doing this. You could try SAFELY raising the front of the car and see if you can get to it from ...

...the wire isn't broken either.??? try coming up in front of the radiator with a long lever and release the bonnet latch when you have the bonnet up then adjust the cable and tighten up the cable ...