1996 Mazda Millenia "serpentine belt slips ac turned" Questions

...serpentine belt. If you take the alternator to Autozone, whether it's on the car or seperate, they can test it for you for free. If this helps please rate this. Thanks Hi..my name is Keith..and to ...

...serpentine belt when activated Air conditioner pump sometimes slips for 30 seconds on serpentine belt sometimes when you turn AC on then works fine after. This is very hard on belt, it lasts only ...

...belt or serpentine belt is slipping ,get a spray bottle put a little dish soap in it and mix with water, spray on fan belt, now start the car and turn on your ac, if the noise goes away you need to ...

...serpentine belt the alternator belt it has a new timing belt too. Help? You may need a new serpentine belt tensioner. That's the part that keeps the belts tight. If it's weak, it may be allowing the ...

...serpentine belt on my 1984 Buick Lesabre keeps breaking when turn on air conditioner or heater why? Most likely you have a seized AC compressor. When you ask for AC or heat the AC clutch engages with ...

serpentine belt keep breaking; afterwards I notice some smoke coming from that area and my serpentine belt felt hot to touch, can someone please explain to me why that happens? something that the belt

...serpentine belt to slip, or you have a pulley for the serpentine belt that is not spinning freely and causing the belt to slip. A slipping belt can also cause the burning smell that you describe. You ...

...serpentine belts tension is loose or the belt is going hard. Check the tension on the tensioner pulley and condition of belt. The belt is slipping on your accessory pulleys when a load is placed on ...

serpentine belt on my Pontiac G5 and now it makes a horrible noise for about a minute and the idles and stops making the noise. What's wrong ? Take the belt off and turn all of your pullies by hand an

serpentine belt and it made the squeaking noise worse so i took the belt off and turned all the pulleys. All of them turned fine except the camshaft pulley. Is this normal? and if not whats wrong with