2005 GMC Envoy "low beams working" Questions

Low beams don't work; High beams fine. Not the Low beams don't work; High beams fine. Not the bulbs or fuse. What else could it be? the high beam switch is at fault A new one is needed The directional

...low beams do not, then it is probably the high/low relay. It is part number 15016745 and has four prongs. To test if your relay has gone bad locate the relay in your fuse box. There will be two of ...

Low beams stopped working but all other lights work When we were on vacation last week ,our low beams including daytime running lights stopped working. But the high beams and parking lights and fog ...

...low beams dont work switched fuses 45 and 46 still nothing any ideas last night low beam headlights wouldnt work all other lights including high beams work. checked both 10 amp fuses and they look ...

...work, but no low beams If they are separate lights for high and low beams both may be blown if they are in the same unit it may be in the dimmer switch. or fuse if it has diff. fuses for high and

low beams but the high beams work replced low beams lamps check all fuses and relays but have no lights How did you check the relays? The most common reason for low beams to be out is Relay #46 in the

...low beams will turn off, my high beams will work, low beams eventually come back on. the daytime running light module is no good.,or the relay is overheating and cutting out and comes back on when ...

high beam works and low beam dont , checked fuses under hood there good , tried new switch stilll no low beam , is there a relay for low beam cant find one. Why yes there is. It's #46 under the ...

why dont low beam headlights work on 2007 gmc envoy low beam head lights HEADLIGHT SWITCH Replace your relay under the hood. Very very common problem. There is a re-call for this issue, but no ...

...low beams are out but the high beams work. I changed the bulbs but still not working. I purchased and installed the shifter arm that puts the high beams on, but still low beams not working. I see it ...