...Torque to: 89 lb-ft. (120 Nm) Vent hose to the rear axle vent fitting Shock absorbers to the rear axle Brake calipers (See: Brake Caliper) Parking brake cable (See: Parking Brake Cable) Rear ...
...74 Nm). Shock absorber lower mounting nut/bolt. Torque the nut to 75 ft. lbs. (102 Nm). Shock absorber electrical connector to the rear suspension support, if equipped Rear wheel Negative battery ...
...rear shock torque specs for a 2007 sport trac I need the torque specs for the sway bar link, lower control arm to hub bolt, shock bottom bolt, shock mount bolts and shock shaft bolt for a 2007 Ford ...
...Nm). Shock absorbers to the rear axle. Torque the upper and lower nuts to 63 ft. lbs. (85 Nm). Brake hose bracket to the control arm. Torque the bolt to 33 ft. lbs. (44 Nm). Remove the axle
...torque spec for bolts holding the rear shocks on the rear of a 2006 Dodge Sprinter 3500 Hello acadiamaine, If the shock absorber bolt to the axle is a 14mmX1.5 it should be torqued to 110 Nm if it is ...
Question about GMC Yukon XL
...you can read the fSM for that. or use google, ever use google,.????? amazing my 1st hit here ill type it for you....... omg ...
...REAR WHEEL AND SUPPORT THE LOWER CONTROL ARM WITH A JACK REMOVE LOWER SHOCK ABSORBER MOUNTING BOLT. REMOVE SHOCK ABSORBER ASSEMBLY FROM THE VECHICLE. COMPRESS THE COIL SPRING WITH THE PROPER SPRING ...
...if there are some bushings located? DID YOU TORQUE STRUT CARRIER BOLTS TO 60 FT LBS AND TORQUE UPPER MOUNTING NUTS TO 22 FT LBS. IF YOU DIDNT TIGHTEN ALL BOLTS AND NUTS YOU WILL HEAR REAR STRUT
What are the torque settings for the nuts on front and rear shock absorbers on a 1995 Izuzu Rodeo 4WD V6? good @ tight or untill rubber starts to bulge
...Torque the nut to 214 ft. lbs. (290 Nm). Brake drum Rear wheel Negative battery cable Rear wheel bearing installation hope this helps if so send testimonial comment or even any other questions you ...
295 questions posted
Usually answered in minutes!
721 Questions
500 Questions
426 Questions
128 Questions
17 Questions