...disassembled one) is the button you push to activate the 4x4 is stuck. You might try to look in your owners manual for a fuse to the 4x4 unit. If you pull the fuse a stuck button would not
...Ford Explore 4x4 stuck in 4x4 Low put 4x4 low on my 2003 ford explore but when i tried to disengage it wont go back to normal what cani do? Try backing up in 4x4 then put it in N and shift out of ...
4x4 switch stuck in low 4x4 it will not switch to auto 4x4 Put in reverse then nuetral and try to change it that way.
...4x4 motor, leaving me to believe that the GEM module is the problem. Any suggestions on weather this is correct? or could there be another source to the problem? Thanks Same problem here stuck in 4 ...
...stuck on 4x4 low also every time i drive it the (o/d off) light blinks repeatedly. Your transmission should be in neutral when shift from 4x4 low to high. Also the brake needs to be depressed. If you ...
4x4 stuck 4x4 wont disigage Most 4x4s will only in gage when in neutral and disingage. Try it in N
...in 4x4. 4x4 indicator light flashes too. SOUND LIKE CLUTCH TO SHIFT MOTOR STUCK. OR FAULTY.CHECK THE 4WD FUSE MAKE SURE ITS GETTING POWER.TO SHIFT MOTOR ELECTROMATIC CLUTCH SO THE CLUTCH CAN
...a 1997 ford explorer two door. It's stuck in 4x4. Is there any way to manually disengage the 4x4 so I can atleast drive it till I get the $ to fix it? Remove the front drive shaft is the only
stuck in 4x4 or your switch is. look under vehicle at the transfer case. find the shift shafts (usually toward the top) find the switch, remove the wires, then remove the switch. Take an ohm meter and
stuck in 4WD low If you have an electric shift transfer case, (little knob to change to 4x4), then the motor may have gone out. There are several fuses and relays associated with the 4x4. Check all of
3,947 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
1,513 Questions
1,369 Questions
