2002 Ford Explorer "egr located valve" Questions

...EGR valve is located at the right rear corner of the intake manifold near the firewall you will have to remove the throttle body cover to access it.Thank you for using Fixya! Where is the egr valve ...

...on ??? where and what does egr pressure sensor look like ??? the two codes that came were for egr valve /// You can have a look at the position of EGR valve and where it is located in following

...the camshaft sensor located on a 1996 ford explorer 4.0 literand where is the egr valve located also cam sensor is located rt side of engine half way up egr is left side of engine front ove valve ...

...egr valve and I did not fix the problem. What do I do next? Check for vacuum leaks on intake manifold, the air tube between the air filter. intake manifold vacuum hose. === clean throttle plate with ...

where is the egr valve located on a 2002 explorer xlt The EGR valve should be located on the intake manifold. Hope this helped and best wishes.

...do a scan 1st--not all problems show on a readout-like vacuum leaks or a failin computer--throttle body probly needs cleanin where is da egr control solen noid located on the 1996 ford

EGR VALVE OR OR EGR PRESSURE SENSOR OR POSITION SENSOR. I KNOW WHERE THE EGR IS BUT CANT LOCATE THE OTHER TWO SENSORS. IS THERE A DIAGRAM SHOWING THEIR LOCATION OR CAN YOU TELL WHERE THEY ARE. I INEND

egr valve on 2002 ford explorer v6? I have tried std 1 1/16" wrench, but there is no room to move given the location of the egr valve/tube. Is there a specialty tool or trick? The only other thing you

...located? The EGR is most often associated with the intake manifold. The EGR will be sited at a point of contact with both the exhaust and intake manifolds. If the exhaust manifold is remote, for ...

...egr(dpfe) sensor located in ford explorer-xlt 2002 4.0 SOHC? If so it will be on the drivers side of the engine. Look for the metal tube that goes into the upper plenum just behind the throttle body. ...