2002 Ford Explorer "door knob lock" Questions

...knob goes down but doesnt lock the door Pull panel off and have a look at the connection rod and latch assembly. Rod should go from lock/handle to key hole, to latch assembly. Could also end up being ...

...door won't unlock with key or remote, but does w/handle From the remote, the inside unlock button, or the key, the lock knob starts to rise, but then drops back down to locked position. All other ...

door handle at the same time, eventually the knob pops up and you can get out! The remote can't open it either. This is the 2 door model, and the drivers lock and rear hatch work fine. Thanks! you are

...times to work the cleaner into the switches. To fix the lock problem, you must first pull up on the knob in the door panel to unlock it. Then remove the door panel, and replace the door lock

door lock knob on the door moves, or tries, but does not go fully into correct position? Overall, there seems to be the same problem regardless of whether I am using fob or door control. Door control,

...knob starts to rise, but then drops back down to locked position. All other doors unlock as expected from remote or unlock button on interior front doors. The drivers door does unlock from the ...

...door latch inside there, and it unlatched easy. After I put it back together, the knob still doesn't rise as high as the other side. I think the linkage is binding, and the connecting rod is bent. At ...

...door lock actuators at your local wreckers. you also may be able to source some remotes for the door locks, however having the remotes reprogrammed may be a bit of a pain and you would most likley ...

2017 ford explorer, change door lock knob SIMPLY TURN IT COUNTERCLOCKWISE AND INSTALL A NEN ONE unscrew it

door key uses the power lock system to unlock the doors and does not unlock manually. i suspect it's a module of some sort but not sure where the lock module is any help would be great thanks On a 96'