2002 Ford Explorer "change rear gear box oil" Questions

rear of the car when the auto gear box changes in low gear and a noise from the near side rear jolt from the rear of the car when the auto gear box changes in low gear is a common fault in the older s

...rear gear box fuild with an 80W oil and added 7 oz of friction conditioning fluid to eliminate 75% of the loud whinning noise. Has anyone had success with a similar method? I used SFR (Superior ...

...gear box,have anything to do with the way your truck takes off? You may want to use common sense and also seek the advice of someone else sounds fishy but there is a drain plug on the bottom and a ...

...or brass synchro as Pennziol does,for transmission m/t so it GL5 will not eat the rings. for real axles the best hypoid gear oil, like in rear/ OK 120 should be ok on hot climates, 120 means hot

...change the both rear sensor, rear brake pad and brake sensor, change the ring in the drive shaft, change the gear in the transfer case and change the oil in the transfer box, clean the front sensor ...

...the VIN # and they will tell you the correct amount of gear oil and weight you should use . If you have a standard rule of thumb change your oil's in gears 50 thousand miles max that means rear end ...

...rear gearbox coupling and the front shift bush.the next thing im going to do is change the oil in the gear box.what else should i do? Adjust the shift plate (under the shift lever on the floor of the ...

...fault codes and look for servo/sensor faults and next have an oil change done on the gear box. The rear end has nothing to do with gear shifting so you replaced the rear end bearings for no

...rear main cap and will leak next to the bell housing indicating a main seal . If auto then the seal on the converter will leak and the oil will leak out of the bell housing. If you are convinced that ...

...rear main seal my mechanic told me that he needs to take the gear box out to change it is this correct and how long would this take approximately the mechanic is right,to fix a rear seal you need to ...