2002 Ford Explorer "brake light car won 39" Questions

...brake light switch is in need of replacement,it is located just above the brake pedal pad(where you push on the brake pedal)on the metal shaft that connects to the brake pedal where you push on ...

...won't turn off look under your dash at the brake pedal and there is a switch that operates the brake lights its usely on the brake pedal unit its self it looks like a box with a push button on ...

...out of park check to make sure the brake lights are working as some of these won`t release the park lock if the brake lights don`t work.then check the fuses with a test light and replace as ...

brake light ... bulbs are good, all lights work when vehicle lights are on except the left turn on rear of trailer Use this as a guide and a 12 volt test light, or multimeter to see if power at proper

...brake controller and the green light won't go on. I am told I need to add a fuse where is the fuse box to add the fuse so that the system recognizes the brake controller in a 2002 Eddie Bauer ...

Brake pedal that prevent when certain things happen. When your vehicle is in Park or Neutral, the power wire from the Ignition switch can make a connection to the wire that controls the starter Relay.

...brake light won't turn on and won't turn back on. Does this mean I need to replace my brake light bulb? on your brake pedal yuo have a switch to turn off the brake lights when not in use and ...

...brake light won't work but reverse lights and directional signal do. The bulbs are fine as I've moved them around and still no brake light. And coincidentally, the left brake light won't ...

brake light works fine. Lower two won't work. Fuse is fine. Bulbs are good. Just changed brake light switch. Any suggestions/ideas? Check the voltage or the connection. __________ Multi-Cardiag M8

...Brake lights won't work but 2001 jeep wrangler. Brake lights won't work but tail lights and blinkers work. We've checked the fuses and the brake switch and the wires and its grounded.. But ...