2002 Ford Explorer "axle assy rear" Questions

Ad

...wheel and caliper off but the rotor will not come off. Is it the hub or the bearing or even the axle causeing the problem I saw this once and it was the same corner. The wheel bearing/hub assy is

Ad

axle assy and take to the engineering shop to get it pressed off and a new bearing and seal assy pressed back on . Then refit in reverse of removal and bleed the brakes and top up the rear axle of oil

Ad

axle seals are leaking, what you are seeing is gear oil from the rear differential, you will need to remove the rear axles you do this by removing the differential cover and removing the lock pin from

...axle assy from a wrecked truck, or if your ring/pinion gears are OK, install Detroit Locker TrueTrac to replace spider gears. Good luck. sorry nissan don't rebuilt part like that in fact if you go to ...

Question about Ford Explorer

1 Answer

...take to replace if you have the tools needed an hour or so is it front or rear ,rear takes less time you will need impact wrench and an air compressor to remove the front assy because of the axle ...

...we changed the brakes and noticed when you push on the rear wheels the axle moves back and forth,a lot. this is my vw dune buggy. also when driving it you hear a loud noise. replce hub

...assy, then pull both axles out.Remove the outer axle seal, throw away, ten using a bearing puller tool remove the bearing from the axle tube, install new bearing ad seal with drivers and reinstall ...

Question about Ford Explorer

2 Answers

...axle shaft. Use appropriate spindle nut socket to remove spindle nut ratchet assy. Remove Hub. Position hub on floor and pry seal from hub. Hammer in new seal. Reinstall hub and bearings. Torque ...

...assy out of a 2001 chevy silverado 1500 pickup. We have all the rear bolts remove, but the hub will not budge. Does it take a special puller to get it out? That is not a wheel hub ***.It is a axle ...

axle. Need to take rotor off and either press bolts out with an arbor press or can be tapped out with a copper or brass hammer. Once out, the new ones can be pressed in by putting about 4 or 5 washers

Not finding what you are looking for?
2002 Ford Explorer Logo

3,947 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

2003 Ford Explorer
2003 Ford Explorer

1,369 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...