1997 Ford Thunderbird LX "allen wrench need remove caliper" Questions

...(star shaped). With a torx bit in that hole all u will do is mess up a torx bit and the flats for the allen wrenches to grab onto. Try using a 10 or 12 mm( cant remeber which it is) allen head

...mainer 2008 front brakese allen wrench or hex size to fit caliper mounting bolt size needed hex or allen wrench fit mounting capiler Allen wrench size to remove brake caliper on my 2008 mercury ...

...allen wrench that fits on a ratchet, but just an all steel allen wrench will work. You should be able to remove the calipers at this point. When re-installing the calipers you'll need to push in the ...

...allen wrench to take the calipers off?? You will also need 5" clamp, screw type to compress calipers, be careful to slightly loosen the bleed screw while doing so or ABS system could be adversly ...

...allen wrench to remove front calipers 2002 Trailblazer - 4 bolts on caliper. I loosened the top bolt with the pin, but when I try to loosen the bottom, it feels like I'm tightening it. Do I need to ...

need size of allen wrench needed to remove front brake calipers from 2006 mazda tribute You will need a 7mm allen to remove the front brake caliper.

...allen wrench to remove it. The brake caliper will come off the rotor and the brake pads will come out of the caliper. The pads are usually different for the inside and outside position.Now come the ...

tools needed to change front brake pads on 1997 chevy blazer Jack, Jack Stand, Lug wrench to remove tire, 3/8" allen wrench to remove caliper, disk brake caliper compressor.

Allen wrench or a Torx driver. Most calipers can be removed with either a 15mm or a 13mm socket or wrench. I would recommend removing the tire and wheel assembly to LOOK at the caliper and see what is

allen wrench needed, stick the allen key in this hole, you probably are'nt going to be able to see it but its in there, stick the allen key in an apply a little pressure while turning and it should go