1991 Ford Mustang "starter disengage" Questions

...disengage, replaced starter, back to square 1, jumping across solenoid to start - whats my problem??? Ignition problem... No signal from ignition to solenoid...run a starter draw test to confirm ...

starter won't disengage even with key out The starter solenoid is most likely shorted. Located close to battery and positive cable goes to it.

...starter won't disengage even after the ignition is switched Changed starter after 17 years. Now, 2 weeks later. The starter starts the 92 f-150 just fine, but wont stop cranking even after the key is ...

With ignition switch on i ran a seperate earth lead from the battery to the car engine and the car started but starter did not disengage The starter solinoid is bad.Clean and check battery cables also

...disengage from the Flywheel, extra drag could occur. If you can still drive the car, have a starter draw test performed with the transmission in neutral. The draw test can show the health of the ...

starter wont disengage and it kills my battery Find the starter solenoid near the battery. When the starter sticks on remove the small wire from the starter solenoid. If the starter stops the issue is

...starter and soliniod it still will not disengage any ideas? The only things i can think of would be either the ignition switch itself is bad or you have a shorted s wire to power. you can check this ...

disengage and the starter keeps running, after beating on the solenoid it will drop out. Took this one back to the Ford dealership, they gave me another new one, it has done the same thing after about

...disengage the drivetrain or prevent lurching. The alignment of shift linkage can also affect the switches. Usually this is arranged in a trio: brakeswitch, shift lever, and ignition switch or ...

...try the cables and then check your battery to see if it is good. There's a good chance that the starter is bad and not disengaging. It sounds like the starter is seized (internal meltdown). It ...