1991 Ford Mustang "smell gas fuel filter old" Questions

...gas/fuel injector cleaner & filled up tank. Found out it had a leak from a round rubber piece so i dropped the gas tank and cleaned the gunk from the strainer, and changed out the fuel filter, which ...

fuel pump, especially if you aren't smelling any gas. It does seem like you are not getting any gas. I would start there. Good luck to you. I had some photos from Auto Zone, they have an excellent how

gas smell was not strong,but when I would walk around the front I cound smell (gas smell) I check all the EGR valves and found that two were not working. What happens to old vehicles the EGR values is

...gas line antifreeze. Motor still runs rough, no power. Thinking fuel filter may need changing. Is the fuel filer on fire wall, drivers side ? Fuel filter is either there or along the frame rail under ...

...smell of gas is a sign that its working wright From what you have said it is a fuel problem but its unlikely a pump problem . Was the old fuel filter clogged or restricted and what differance if any ...

...gas smell in the car when turning on the heat or fan, I looked under the hood and sau a tubular device on top of the motor that appear to be slightly leaking it has a tube that connects on the to of ...

...if it has this foul smell, believe me it will be a noticible smell, Then your gas has turned bad and you should drain it out and refill it with fresh gas. Good luck and hope this was a little

...smell of gas there is stronger than usual. IF it is check the charcoal filter, the cylindrical canister that has a vacuum hose connected to it to filter the smell. Check if there are loose hoses. You ...

fuel tank and put in fresh gas,unleaded gas does not do well over three months old and if it is an ethanol blend it will actually start to grow a fungus.Change the fuel and the fuel filter and if this

...smell the gas......with only the above provided information, I would start with that....good-luck.... Check all your spark plugs and wires also your distributor cap and roter could also need oxygen ...