2003 Mitsubishi Eclipse Coupe "03 3 engine spark" Questions

...3 spark plugs of an 03 impala its a good idea to use a jack to brace the front of engine. then you remove the front motor mount and allow the engine to come forward but stil support the engine with a ...

...03 hyundai santa fe?? To locate and change the the (4) spark plugs on a 2003 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover ...

...03 Optima's performance/drivability problem. Proceed to your nearest "free Check Engine Light" service, and have them read your car's computer code for you. These OBD-II codes indicate a bad spark ...

03 polo?, confusing , so I will answer in the generic. (any modern car) any engine dies for vast reasons, I have a list of 50 . but breaks down to 4. (in pure physics) Otto cycle engines, GAS. 1: lost

...03 honda crv is crank but won't start,Icheck the spark plugs they are wet with gasoline,I beleave there is no spark to the spark plugs alright 3 posts. what does "I believe mean", in the real world ...

...03 rendezvous) went to local dealership, they said that GM is blaming this issue on ethenol in fuel. I have added "good" fuel system cleaner to gas tank on all 3... not sure what else to do ...

...03 highlander? It is very easy, on all new vehicel, you have to know there is a plastic engine cover on the engine, just simply remove all bolts and set the cover free.Follow on the engine head you ...

...03 mitz galant 3.0 v6 Disconnect the negative battery cable. Remove the upper intake manifold. On the 3.0L DOHC engine, remove the ignition wire cover. Remove the ignition wires and spark plugs. ...

...03 the idle is more high to low That sounds like your coil pack. The coil to number 1 & 4 may be bad. The other coil, to number 2 & 3 cylinder is good and working. If it's not the coil, you ...

...03 mazda tribute v6 They are under the ignition coils on each side of the engine. The left bank (front of engine compartment)can be relaced by removing the plastic cover then removing the connectors ...