2006 Dodge Charger "seafoam cause misfires" Questions

...is often due to ignition system components. "Decarbonizing" is Chrysler's version of using "SeaFoam" in your engine. In fact, the product is basically the same, only more expensive. It has ...

...misfires MISFIRES CAUSED BY BAD SPARK PLUGS AND COILS.STOPPED UP FUEL FILTER AND DIRTY FUEL INJECTORS CAUSES MISFIRE PROBLEMS.ALSO CLEAN YOUR FUEL INJECTORS.PUT A BOTTLE SEAFOAM IN A FULL TANK OF

A CAN OF SEAFOAM TO A 3/4 TO FULL TANK OF GAS.CHANGE FUEL FILTER, IF ALL READY CHANGED SPARK PLUGS AND WIRES.A WEAK FUEL PUMP AND A CONTAMINATED MASS AIR FLOW SENSOR WILL CAUSE LEAN MISFIRE CONDITIONS

FUEL PRESSURE SHOULD BE 50 - 60 PSI WITH NEW FUEL FILTER.CLEAN FUEL INJECTORS BY ADDING A BOTTLE OF SEAFOAM TO 3/4 TO A FULL TANK OF GAS.SEE WHAT HAPPENS

...cause this)-is there any chance the last oil change set this off? The proper viscosity is very important and may have caused these codes. The P2198 is O2 sensor signal stuck rich bank 2 sensor 1. Has ...

...cause erratic idling...second thing, remove and clean IAC valve and MAF sensor..dry and replace, also try putting some SeaFoam in the petrol, engine oil and air intake, let sit for 10 minutes then go ...

seafoam in oil engine misfiring had code for o2 sensor ,r&r sensor code gone, had codep0305 ,changed plug and wire for cyl 5, code gone now have code for random misfire. what direction do i go now

...after driving through some muddy and wet roads go the cheapest route. replace fuel filter and add SEAFOAM to tank of premiun fuel. replace filter before 500 miles. then add SEAFOAM to gas every

...cause a misfire at one cylinder,you could do a tune up,replace spark plugs and wires,clean fuel injectors pouring can seafoam to full tank of gas and change fuel filter,doing tune up will help pin ...

...or fuel deposited all up, Don't just change it, Do a complete tune up and change them all, also add Seafoam to the tank to clean the entire fuel system, that should take care of any injector problems ...