2006 Dodge Charger "opening transponder key" Questions

transponder key stopped working. car wont start anymore. i can open and lock the doors fine but just cant get the car to start This means that the programming of the Transponder Key has been corrupted

...key and a transponder and the second generation key is a one piece key with a built in transponder. First Generation Key 1 Loosen the single screw that is located by the key ring. Use the small ...

...key with a transponder chip or is it a regular key you can get a regular key cut at home depot or some other place that will open the doors but the key that starts the car must be programmed to the ...

transponder key starts the car but does not open the door or lock it remotely even with a new battery. Remote function did work until I tried to program a new transponder key without buttons using the

...transponder in every factory key. If the transceiver cannot read your key, the red security light will blink rapidly.If this happens, make sure you are using a factory key and there are no other ...

...transponder key to open the door first???does the car need a master reset to reconsise the new parts??disconnecting the battery doesnt reset it....as its with the security system do i need an auto ...

...key, or the transponder failed, or whether it is a main computer problem in the vehicle. This is not an uncommon problem with these vehicles. sounds like a comp. problem altogether.get a new key from ...

remote central locking transponder key for bmw318ise w reg will not open doors but will open boot and when doors open it will lock them.any ideas? the buttons in the key are worn, you need a new key.

...key case and remove the transponder with the buttons on it and transfer it to the new key case, no programming necessary because you are using the same transponder, al that's left then is to have the ...

...the ignition. The starter motor turns the motor over to start the engine, either by pressing a button or turning a key. So if the transponder is broken or not tuned to the ignition it will not