2005 Chevrolet Equinox "mean engine light goes" Questions

engine. The green light comes on when your headlight switch is on 'auto' until you turn it to 'parking lights' or 'full on' function, that'll turn off the green light...it's normal. The other thing is

...engine. Oil level is fine, but did add some last week. What does this mean? If your Oil Pressure Sending Unit went bad, it will do this If you have a Blockage in the Oil system, it can do it If you ...

...engine light on daytime driving light indicator flashing check engine light went out indicator light still flashing then goes out. hi.. first of all it means that u have a problem some where on the ...

...engine light on and stabila track on , i was told it was the tps sensor is that the sensor on the gas pedal or is that in the throttle body Hi I would suggest this fsult is tested using correct ...

...light on the dash does flash on and off about 4 times then goes out. Hiya... When this happens, it means one or two of the halogen headlight bulb(s) has been burnt-out. Do this quick and easy ...

...engine, then release the key to ON; the vehicle will not start. 3. Observe the SECURITY tell tale light. After approximately 10 minutes, the light will turn OFF. 4. Turn OFF the ignition ...

...start my engine but goes off after a couple of minutes driving.What does this light mean? The blue light stays on till the engine is cold. It goes off when the engine warms up. It is normal

engine light is flashing on, and is running rough! When engine light flashes, roughness goes away, when roughness comes back, engine light goes away WHEN THE LIGHT IS FLASHING IT MEANS THAT YOU HAVE A

...mean If the engine check light is on there is a problem somewhere on the vehicle. You will need to get the vehicle plugged into a diagnostic system or an OBDII scanner. Find out what the error codes ...

...mean when my check engine light goes on? If the check engine light is On that means there is a error code got set in the cars computer.Get your car scanned at auto-zone for knowing the exact fault ...