2005 Chevrolet Equinox "fender trim" Questions

...trim at base of radio antanae How can I replace this part. I can't slip it into place. Do I have to take the fender off? yes you may need to also make sure the clips arent broken from the old one if ...

...trim removed, you will need to remove 3 bolts that retain the headlight assembly and one press-in tab. The bolts have 10mm heads. Two are located on the top of the assembly, one on the lower corner. ...

...trim removed, you will need to remove 3 bolts that retain the headlight assembly and one press-in tab. The bolts have 10mm heads. Two are located on the top of the assembly, one on the lower corner. ...

...trim removed, you will need to remove 3 bolts that retain the headlight assembly and one press-in tab. The bolts have 10mm heads. Two are located on the top of the assembly, one on the lower corner. ...

...fender on a 1975 Triumph TR6 Start with removing all the trim on that render, the grill, the front bumper and the headlight trim etc. Remove the Front tire then locate and remove the screws holding ...

...fender trim to get to wheel well to expose power antenna can't remove outer fender trim ? There are several screws inside the fender well that have to be removed and one in the pinch molding of the ...

...fender trim, and disconnect the washer hose from the 90-degree fitting. CLIP FRONT FENDER TRIM FRONT HOSE 7. Disconnect the 2P connector and the two washer tubes from the washer motor. 8. Remove the ...

...FENDER UNDER HOOD 1 BOLT BEHIND PLASTIC TRIM BY MIRROR PULL THIS PIECE BACK TOWARDS MIRROR OR IT WILL BREAK TABS OFF 1 BOLT UNDER ROCKER TRIM 1 SCREW INTO ROCKER AND 1 SCREW BEHIND PLASTIC SHROUD ...

...fender on. The chrome trim is fastened on with nuts that are accessable with the grill out of the way. The metal strip under the lower grill trim is screwed into the fender so go under the truck and ...

hit a pole and pushed wheel to fender 1999 vw jetta my tire is pused to fender whell wont move foward Pull Fender well out or trim it.