2005 Chevrolet Equinox "coil dis ignition work" Questions

DIS ignition system there are many things that can cause it, i would check the plugs the wires and the coil packs in that order, if the plugs have any wear at all replace them first and check the rest

...coil by first dis-connecting the wires from the ignition coil and then test with the "Neg" lead from the ohm meter in the high tension terminal on the ignition coil, and the "Pos" lead from the ohm ...

...dis-assembled to install a new pick-up coil/stator. If you do purchase a new ignition module be sure that it does come with a silicone grease or a die-electric compound because it is a heat sink and ...

...coil by first dis-connecting the wires from the ignition coil and then test with the "Neg" lead from the ohm meter in the high tension terminal on the ignition coil, and the "Pos" lead from the ohm ...

...coil is not getting a signal to fire. There is no deticated module or DIS that you are looking for because the PCM is what sends a pulsed ground to fire the coil. In order to check if the coil is ...

...add three things: 1. Check the grounding bolt on the DIS module for corrosion. 2. besure the secondary wires are fully seated, you should feel/hear a click 3. use dielectric grease on the coil ...

dis-assembled to replace the pick-up coil/stator inside of the distributor. Also, check the fuses and all of the wires to the ignition module for any damaged wires with missing wire insulation and any

...coil needs to go in on power on HEI. Might need a ground too not sure. Other then that it's optional. Like tach etc. Should slide right into place of the orginal. Just have to line up rotor an then ...

...DIS (digital ignition system). Plugs are changed the same as usual, just without the cap and rotor. Instead of a single coil, now the new system has COPs (Coil over plugs) installed, these are ...

...dis-assembled to install a new pick-up coil/stator. If you do purchase a new ignition module be sure that it does come with a silicone grease or a die-electric compound because it is a heat sink and ...