brake and feeding bad data to the controller. The controller than treats it as a low traction situation and starts pulsing the brakes. If this is the case, you would see an ABS or Low Traction warning
...is worn out and scraping the drum. The brake cable could be sticking on, and if so will need
...brake pads or pads and rotors. The ABS light may go out after one or both of these things are repaired. The ABS codes can be checked for the exact cause and suggested repair needed to correct the ABS ...
...brake booster it couldhave a little side wall cut change it an get back to me You should replace the rotors in pairs but that's not the problem. As you replaced the callipers I would check the hoses ...
...rotors for runout, calipers seem to be loose ? even though the bolts are tight. Could the calipers be worn ? I Have 206,000 miles on my 1995 Chevy Suburban 2 wheel drive.. Also , the idler arm has ...
...brake pads well, if you snapped one of the caliper bolts you still may be able to proceed, try sticking a screw driver through one of holes on the caliper above the pads and rotor and try to press ...
...replace the shoes the pads and turn the rotors and drums to make it work correctly, you take your life into your own hands an anyone that is driving towards you. I hope you reconsider. inside the car ...
...it Check if the spiders are bad... I May be off a year with application but if the spider was never replaced you are due. spider is the part that plugs into manifold to each intake runner for fuel ...
...replace the rear oil? There is a specific thickness a rotor needs to be to function properly. The minimum thickness is usually stamped on the rotor itself, sometimes on the edge and sometimes on the ...
1,294 questions posted
Usually answered in minutes!
4,236 Questions
3,219 Questions
2,541 Questions
2,307 Questions
2,177 Questions