1995 Chevrolet Camaro "replace gasket oil housing unit" Questions

...filter housing.no pressure on the gauge REPLACE YOUR SENDER, . REPLACE FILTER , YOU MAY HAVE CROSS THREADED, DID YOU OIL PAINT THE GASKET.? CHECK THE FILTER HUB FOR DIRT, GRAVEL, OLD RUBBER,

...bolts to remove the housing unit so I can replace the gasket... The car is a 94 Ford Thunderbird are you sure it was not just the oil filter gasket? if you remove the bolt the housing will come

replace gasket behind the housing one other problem i have seen were somone had changed a oil filter not relizing the gasket stayed on the housing check to make sure there isnt two gaskets only one on

...is actually a gasket that is between the oil filter housing assembly and the engine block. If it is anything like the Nissans, they do have a tendancy to start leaking over time. Hope this

replace? Oil pump? Your filter is leaking, check it out. Can only be the adapter or the filter gasket This is the oil filter and there is a gasket on the oil filter which could have worn out. hence it

i have a 1998 GMC Sonoma, and it leaks from the oil filter housing right above the oil filter. Should I repalce the whole unit, or is it an easy fix? replace the filter housing gasket, not hard to do

oil filter housing and the cooler lines at the housing. The oil filter housing gaskets are good for no more than 15k to 30k miles if your lucky. The lines at the housing are easy to strip out when you

...bigger than a 19mm. It's the nut in the middle where your oil filter spins on. If it's on the flange (block area) you'll need a paper gasket and a long allen socket to remove the three allen

...of transaxle housing) - oil filter bracket to block o-ring seal (drips on front bank exhaust) - crankshaft nose oil seal (have done with timing belt change) - rear main seal (expensive, leave it

...I have a private individual do it rather then a professional. You got 2 bolts were your oil filter housing is. Take them bolts out and replace. Your gonna have a gasket. Replace that as