...air intake hose i have a 95 camaro and when i take off the rubber air intake hose where it connects to the intake manifold there is a trail of oil in the hose and in the opening of the manifold..... ...
...air intake 97 camaro v8 do you need to adjust computer when adding cold air intake on 97 camaro v8 5.7 Hey - Glad you're doing a power add on. The short answer is no. You can just disconnect the ...
...intake air temp the computer cuts the fuel back when it reaches operating temp. At this point the MAF (mas air flow sensor tells the puter the engine is running by the airflow through the intake.and ...
k&n intake i just bought the intake 4 my 1993 camaro v6. should i buy the air filter as well? would it help with the air flow cause im not sure the filter that same with it is the same 1 yes
...air intake and there looks to be oil in it. I was told before that the intake gasket needs to be replaced. Would it sound like that might be the problem? You need to replace the intake gasket, no ...
...air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the ...
...air intake will add 5-10 HP and you can bolt it in quick and easy. And putting on a good free flowing exhuast can add up to 25HP. Basically the intake allows more air into the motor creating more ...
...intake air temp sensor,no codes? There is no priming injector on that ,it just extends the pulse width of the 8 others, Have to scan it ,see if the manifold air temp is right,possibly just clean the ...
Question about Chevrolet Camaro
...Intake Air Tempature sensor) ? Did you install in your new cold air intake? The P0113 code sets when it senses an air temp of -31 degrees F for more than 5 second . If you test your IAT with an ohm ...
1,012 questions posted
Usually answered in minutes!
576 Questions
468 Questions
391 Questions
331 Questions
306 Questions