2001 Buick Regal "remove wiper arm" Questions

Ad

...remove the wiper transmission from the wiper motor crank arm. Remove the wiper arms Remove the air inlet grille panel. Disconnect the connectors from the wiper motor assembly. Remove the three screws ...

Ad

...wiper arms which appear ok. the arm mechanism has a clip that pop off get a new clip and remove the access panel and move the arm over to the access area put the arm back into the hole socket and ...

Ad

arm just install a new one and psuh it on firm yes, your wiper transmission arm is bent under the cowl, you have to remove the cowl to access the bent arm, and just straighten it out, it will be fine.

...remove wiper blades from a 2003 buick regal It's much easier to understand how to do something when you see it done, so here is a you tube video that will walk you through replacing the blades. Good ...

Question about Buick Regal

2 Answers

...remove the wiper blade assembly How to Remove Complete wiper assembly arm after poping off the cap and removeing the nut it looks like it would just lift right off hummm thats not the case. I am ...

Question about Buick Regal

1 Answer

...I can hear the moter run when I turn them on. most likely the arms from motor to wipers came off remove metal piece between hood and windshield to ...

Question about Buick Regal

2 Answers

...remove the wiper arms, remove the plastic cover on top of the wiper motor, and look for the tab to straighten. This may take an hour or more, depending on your automotive repair expertise level. I ...

...wiper arm. Remove the clip holding the outside end of the wiper arm cover to the arm. Lift the arm cap up to expose the nut. Remove the wiper arm mounting nut. Using a suitable two jaw puller, remove ...

Question about Buick Regal

1 Answer

remove wiper blade from wiper arm. To Install: Insert wiper arm hook through opening in wiper blade. Place wiper blade pivot in the inside radius of wiper arm hook. Pull on wiper blade pivot into hook

Question about Buick Regal

1 Answer

Wiper Removal Remove the windshield wiper mounting arm and pivot shaft (17566) assembly; refer to Mounting Arm and Pivot Shaft . Remove the windshield wiper motor (17508). Remove the output shaft bolt

Not finding what you are looking for?
2001 Buick Regal Logo

726 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Buick Regal
1999 Buick Regal

757 Questions

1995 Buick Regal
1995 Buick Regal

631 Questions

1998 Buick Regal
1998 Buick Regal

489 Questions

2000 Buick Regal
2000 Buick Regal

420 Questions

1993 Buick Regal
1993 Buick Regal

352 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...