...magnet here to trap stray metal particles. Excessive amounts of steel shavings indicate internal transmission damage. A small amount of sediment in the pan is normal as the friction elements wear. If ...
...transmission. It doesn't want to shift. It does not seem to be slipping as much as not knowing when to shift. I changed the oil filter and cleaned the pan. The oil was not burnt and there was only a ...
...magnet in my transmission pan i need to know where it came from and how to replace it This round magnet is supposed to stay in the bottom of the Transmission pan to catch any metal flakes, shavings ...
transmission pan magnet Replaced the transmission filter on my 2004 Explorer Sports Trac - #5R55E Transmission - and now I'm not sure exactly where the magnet should be placed in the bottom of the pan
...magnet. Remove the oil filter. Remove the filter neck seal. The transmission oil pan gasket is reusable. Inspect the gasket and replace as needed. Clean the transmission case and the oil pan gasket ...
...transmission. If equipped, don't forget to install the pan magnet. Tighten the pan attaching bolts as follows: C3 and C5 Transmissions: 12-16 ft. lbs. (16-22 Nm) A4LD Transmissions: 8-10 ft. lbs. ...
transmission pan. I always remove the return hose(which is driver side on rad base) and put into a container. Put e-brake on start vehicle and put into drive, this will drain fluid out of transmission
...transmission. Discard the old gasket. Clean the magnet in the pan. Clean the pan and the mating surfaces with a solvent and a clean, lint-free cloth. Replace the magnet and allow the pan to air dry. ...
...magnet in the transmission fluid pan NOTE: The transmission fluid pan gasket is reusable, clean and inspect for damage; if not damaged, the gasket should be reused. Install the transmission fluid pan ...
Question about Honda Cars & Trucks
...transmission. there is a pan with about 18 screws around the perimeter. remove the screws to get to the filter, and remember to clean the magnet inside, it attracts a lot of fine metal particles. The ...
726 questions posted
Usually answered in minutes!
757 Questions
631 Questions
489 Questions
420 Questions
352 Questions