...clutch pedal completly then floor the gas pedal , if RPM rising much faster then you gaining the speed there is a possibilities that clutch is slipping.(you can also smell it if it burns) Make sure ...
causes the pedal to go to the floor or have no clutch. but it could also be the slave so bare this in mind, if the pedal comes back up after pushing it down then the chances are its the slave at fault
...floor and not return also if you have to add brake fluid to the clutch master cylinder there will be a leak in the system that will have to be checked out, it could cause a weak clutch pedal(spongy). ...
Question about Ford Cars & Trucks
...going down hill. One of two things is wrong with your truck. Either the hydraulic clutch has a worn component that needs to be replaced or the clutch is slipping and needs to be replaced. If this ...
...return Your car uses what is called a hydraulic clutch, the master or the slave hydraulic cylinder is leaking fluid and you have no pressure in the system, this causes the clutch to go to the
Question about Cars & Trucks
...clutch pedal goes all the way to the floor . Could this cause decrease in power After shifting into gear I'm losing power could it be the clutch? A clutch pedal normally does go all the way to the ...
...clutch is on the floor, where is the adjustment? Imogen make sure you don't have a leak in the clutch master or slave cylinder on the transmission as that would cause the pedal to go all the way to ...
Question about Mitsubishi Cars & Trucks
why is the clutch pedal on my Mitsubishi gallant going to floor? Usually the cause is a faulty master or slave cylinder just like when the brake pedal goes to the floor.
Question about Cars & Trucks
...now. suggestions? Your car has a hydraulic clutch release system, it is defective, either the master or slave cylinder is leaking or pulling in air and this causes the clutch pedal to go to the
Question about BMW X5 Series
clutch went to floor and would not come up ,got lucky and by driving it got back home, You most likely have a hydraulic clutch. Thus either the master or slave cylinder would have to fail to cause the
163 questions posted
Usually answered in minutes!
600 Questions
528 Questions
369 Questions
270 Questions
230 Questions