...power, turn the radio button on, the word "code" does not appear. There does not appear to be any power applied to the radio. I have confirmed that the 15 amp fuse is good. Any ideas out there? Chris ...
...code. have you checked the inline fuse...you have to remove the radio to check ok No power to the radio will most likely be the amplifier found at the left rear corner of the X5.Below the deck ...
...one would experience when the electrical portion of the ignition switch starts to fail. Most of the powered accessories such as the radio, mid, cluster displays etc are directly powered from the ...
...off and take the key out. I would pull the fuse but I don't know which one to take out the one it was supposed to be it wasn't. Turn the radio off with radio power Button, don't rely on ignition ...
The clock radio stays on with the ignition key turned off Does the radio clock stays on all the time with the ignition turned off? reroute the power wire to a switched power source from the fuse block
...power to the radio. When that happens, the radio locks itself out. Check your manual for something that looks like a numeric code. Enter this with your number keys, and this will ...
Radio!!! Thay said that "power was getting to the Radio.............How Can that be!,There are no lights on the Radio,nothing....Help!.I have aCitroen C2 GT...Thanku was the battery dissconnected? did
...Radio code not working and no power to starter The external temp sensor is located just in front of the right front underside of the car.It is located just in front of the right tire.It will most ...
...a fuse on the rdio you blew the radio too. take it out and apply 12v directly to it and see if it powers
...radio....If their is now power whatsoever to the unit, then I would suggest that you get an auto electrician to put a voltmeter on the unit to make sure that it is getting power or hasn't had a ...
143 questions posted
Usually answered in minutes!
600 Questions
528 Questions
369 Questions
270 Questions
230 Questions