2001 BMW 3 Series "side mirror moves" Questions

...time owner of a 2001 316i bmw On drivers side internal door handle there's a small, joystick and an up-or-down switch. the former moves the mirror while the switch selects which mirror. good luck

...side, but cannot for the life of me find the knob that actually adjusts the mirror. Just bought the car and had no owners manual. the 4 buttons around that switch are the ones you press to move the ...

mirror switch at the driver side and clean the contact area, take a test light and check all wires for good connection. one by one test the voltage output,-/+ by pressing the switch, if all wires have

...side mirror inward either when it gets cold outside. They dealer wants a small fortune to replace the mirrors. I assume your holding the right side of the touch pad long enough, its takes a little ...

mirror does not readjust downward to see the curb. I researched the maintenance manual. The fuse you need to replace is fuse 20 in the under dash fuse box. It controls side windows, washer motor, rear

side view mirror not working The seat will move when you push memory 1 or 2. Driver window will not move but other windows will. Side view mirror will not move but pass side view will move. Check your

...mirror on the drivers side folds very slowly but doesn't go in, the passenger side makes a noise but doesn't move at all. The actual mirror adjustments are fine, any ideas? probably just rusty try ...

Power mirrors not working, have tried moving them manually (2001 Ford Crown Victoria). Both sides only goes down, not up. If the mirrors only move down and not up I would suspect the mirror switch , ...

...side mirror keeps moving out of place even after I set it. There is a small plastic piece that is missing from underneath the mirror of the drivers side and I'm not sure if that is the reason the ...

...side mirror dose not work Have you checked all fuses under hood? The mirror itself contains two motors that move the mirror. If the left mirror works propely then the problem is either the selector ...