signal lights, and one pair of fog lights work, but not the low beams. How would I go about replacing these bulbs? Where could I find the fuse associated with the low beam lights to be replaced? Or is
Question about Chevrolet Avalanche
...lights are suppose to work may shed some light on the problem . Headlamp ON/OFF control is determined by the body control module (BCM) by a signal on the headlamp switch on input circuit when the ...
...using the regular push the turn signal stick forward. High beams do work when you use the high beam quick flash by pulling the turn signal stick back. What is wrong?? and how do I fix?? Robert The ...
...signal, both of my high beam lights flash, and I get no turn signals anywhere around the van. Same thing when I use my hazard lights. Brake, backup, parking lights, and high and low beam all work ok, ...
Question about Nissan Cars & Trucks
...a high beam request signal (ON) via the CAN communication lines and turns the high beam indicator lamp ON. Relays are located in the underhood fuse relay box , look inside the lid for location
Question about Chevrolet Avalanche
...lights good. Played with light switch, no help. Could this be a fuze or relay?? No on the fuse . The LH HDLP and RH HDLP fuse in the fuse block - under hood, supply battery positive voltage to both ...
Question about Pontiac Cars & Trucks
...using the turn signal/headlamp switch lever on the steering column. In order to change headlamp operation from low-beam to high-beam, push the switch lever toward the instrument panel (until the ...
Question about Saab Cars & Trucks
...using a volt meter ? Look at a wiring diagram to see what all is involved in turning the lights on ? Do you know how to test electrical circuits ? Also reading service repair manual about the head ...
...be your turn signal/high beam switch. If the lights come on when you use the high beams replace this switch. It is available at most autoparts stores. Not a diffucult repair probably under two
...signal, both of my high beam lights flash, and I get no turn signals anywhere around the van. Same thing when I use my hazard lights. Brake, backup, parking lights, and high and low beam all work ok, ...
615 questions posted
Usually answered in minutes!
538 Questions
471 Questions
445 Questions
231 Questions
97 Questions