my evo 6 car is leeking oil dont no where from wash the engine,when its all cleaned up,put a news paper under the engine,start the engine,wait untill it drips,jack the cor up,then follow the oil trail
...engine oil level and the coolant level. Top them up if they are low. If the light stays on take it somewhere to get the codes read.Go from there. Hope this helps. Hi I had the codes read on my 2006 ...
Question about Mitsubishi Lancer Evolution
...a 7 bolt motor if it is the original motor, it will be a 7 bolt. 6 bolts are from the earlier motors (like 89-94). you can check the oil pan to be sure. ...
Question about GMC Cars & Trucks
...Engine oil seals: Engine oil seals can become worn or damaged, causing oil to leak from the engine. Engine oil cooler: Engine oil coolers can develop leaks, causing oil to leak out of the engine and ...
...Engine Oil Replace Vehicle Inspect Brakes and Traction Control Inspect Tires Rotate 21000 miles or 33600 kilometers Steering and Suspension Lubricate Oil Filter, Engine Replace Engine Oil Replace ...
Engine oil: Drain or extract and replenish; renew oil filter Engine oil: Drain or extract engine oil ? Chapter. Renewing oil filter ? Chapter. Replenishing engine oil ? Chapter. Draining or extracting
...Engine oil options Ambient temperature range Cold climate Engine oil grade SAE 5W/30 Engine oil classification API/ACEA CI/C3 Ambient temperature range Moderate climate Engine oil grade SAE 5W/30 ...
Question about Mitsubishi Lancer Evolution
...engine oil and the engine oil filter. Remove the oil filter adapter. Remove the starter. Remove the flywheel inspection cover. Remove the engine mount through bolts. Raise and support the engine. ...
...Engine Oil 70 ft-lbs. 7/16 Inner Main Caps (4 bolt) Engine Oil 70 ft-lbs. 7/16 Outer Main Caps (4 bolt) Engine Oil 65 ft-lbs. 3/8 Outer Main Caps (4 bolt) Engine Oil 40 ft-lbs. Warning!!! If you are ...
...engine oil by filling either the inlet or outlet port with clean engine oil. Rotate the pump shaft to distribute the oil within the pump body. Install the pump and tighten the mounting bolts to 14-21 ...
57 questions posted
Usually answered in minutes!
34 Questions
10 Questions
1 Questions
17 Questions